NEUROLAB
Autonomous hybrid

M20 Pro

Autonomous hybrid

The M20 with one more host for navigation. It remembers a route you walk it through once, then runs that route on its own.

Unattended patrolMapping · Route repeat · Auto-charging
FIG. 01REF · M20P-MOB820 × 430 × 570 mm
Status: Operational / IP66 / -20~55°C
35 kg
Weight
15 kg
Payload
3 m/s
Speed limit (max 5 m/s)
IP66
Ingress · both batteries
Mapping · autonomy

A route walked onceruns itself

FIG. 02
// M20P-MOB · UNIT 0001

LiDAR maps the site while you mark waypoints and work points. After that it runs the route as many times as you specify, and returns to the charging point when the battery runs low.

Autonomy · Expansion

Mapped autonomy
Supported (SLAM)
Control modes
Manual · assisted · navigation
Auto-charging
Optional
Compute
Three industrial hosts
Expansion ports
5× Ethernet · USB · 24 V rail
Open interfaces

Expansion that ends at a bolt and a plug

Fix your equipment to the 14 M4 threads on the top plate, then run one cable to the rear connector. Five Ethernet ports plus the 24 V and 72 V rails deliver up to 360 W, with the 24 V side kept under 250 W in total.

View details
External interfaces
×75× Ethernet · USB · 72 V · 24 V
FIG. 03
FIG. 04

A dev host kept apart from the control stack

Three hosts split motion control, navigation, and user development. The development host sits apart from the control stack, so deploying your code never disturbs the robot's gait. Both standard interfaces are open — ROS 2 / DDS and basic_server over TCP and UDP.

M20 Pro
Hardware

Wheel-leg hybrid · three industrial hosts. MODEL M20P-MOB

Autonomy

+SLAM mapping · repeated route patrol
+Waypoint and work-point editing · repeat count
+Point-cloud surround view · avoidance (OTA planned)

Power

+72 V · 4.5 Ah × 2 · hot-swap
+3 h·15 km unloaded / 2.5 h·12 km loaded
+Auto-charging dock (optional)

Compute · expansion

+Three octa-core industrial hosts (16 GB + 128 GB each)
+96-channel LiDAR ×2 (0.2–60 m) · 168° cameras ×2
+5× Ethernet · USB · 24 V/72 V · up to 360 W
Technical specifications

Full specifications

Standing dimensions
820 × 430 × 570 mm
Sitting dimensions
820 × 600 × 185 mm
Weight
35 kg
Payload
15 kg (50 kg in extreme testing)
Speed
Limited to 3 m/s (5 m/s in extreme testing)
Site speed
2 m/s
Runtime
3 h·15 km unloaded / 2.5 h·12 km loaded
Gradeability
45°
Stairs · step
Continuous stairs 25 cm · single step 80 cm
Ingress protection
IP66 (both batteries fitted · not submersible)
Operating temp
-20 ~ 55 °C
Compute
Three octa-core industrial hosts (16 GB + 128 GB each)
Autonomy
SLAM mapping · auto-charging (optional)
Interfaces
5× Ethernet · USB · 24 V/72 V · up to 360 W

Representative specifications are shown. All figures are based on the manufacturer's (DEEP Robotics) official test data and may vary in real-world conditions. A detailed spec sheet is available on request.

Other platforms

Worth considering together

M20

Base model

Logistics, inspection and patrol from one machine.

WEIGHT
35 kg
PAYLOAD
15 kg
AUTONOMY
IP RATING
IP66
View details →

M20S

High performance

35 kg on its back, down to -30°C.

WEIGHT
35 kg
PAYLOAD
35 kg
AUTONOMY
SLAM patrol
IP RATING
IP67
View details →

X30

Industrial standard

The fundamentals, for any site that needs inspecting.

WEIGHT
56 kg
PAYLOAD
20 kg
MAX STAIR ANGLE
45°
IP RATING
IP67
View details →
Status: Operational / M20P-MOB / IP66 / -20~55°C

Put the M20 Pro to work in the field.

Request the full spec sheet, or book a field demo with our engineering team.