NEUROLAB
Perception & avoidance

Lite3 Pro

AI compute onboard

Ships with an NVIDIA Jetson Xavier NX and an Intel RealSense D435i. It sees what is ahead and walks around it. Run your vision algorithms on the robot itself.

Comes standardJetson Xavier NX · RealSense D435i
FIG. 01REF · LITE3-PRO610 × 370 × 450 mm
Status: Operational / Forward avoidance / Range 3.4 km
12.9 kg
Weight
4 kg
Walking payload
3.4 km
Range
40°
Gradeability
Perception hardware

It sees ahead,and goes around

FIG. 02
SN · LITE3-PRO-0x3C27

The depth camera reads what is in front, and the onboard compute host re-plans the path on the spot. Where Basic and Venture come to a stop, Pro walks around and keeps going.

Perception · Compute

Compute host
NVIDIA Jetson Xavier NX
Depth camera
Intel RealSense D435i
Perception
Auto-stop · visual tracking · forward avoidance
Interfaces
USB 3.0 · HDMI · Ethernet
Environment
Ubuntu 20 · ROS1 / ROS2
Onboard development

The drivers are already installed.

The depth-camera driver and perception sample sources are preloaded. Plug in HDMI or connect over remote desktop and start developing immediately.

View details
Onboard compute
NXNVIDIA Jetson Xavier NX
Forward obstacle avoidance
Depth perception

The depth camera doesn't see alone.

Alongside the depth camera sit one wide-angle camera and two ultrasonic sensors. They read what is ahead in different ways, so auto-stop and forward obstacle avoidance never rest on a single type of sensor.

Lite3 Pro
Platform specs

LITE3-PRO · compact quadruped platform Full specifications available on request.

Drivetrain

+12 DOF · three joints per leg
+Knee peak torque 36 N·m
+Absolute encoders · precision reducers

Perception & compute

+NVIDIA Jetson Xavier NX
+Intel RealSense D435i depth camera
+Wide-angle camera ×1 · ultrasonic sensor ×2

Interfaces & development

+USB 3.0 · HDMI · Ethernet
+External power 24 V · 12 V · 5 V
+Ubuntu 20 · ROS1 / ROS2 · sample sources
Technical specifications

Full specifications

Standing dimensions
610 × 370 × 450 mm
Seated dimensions
680 × 370 × 160 mm
Weight
12.9 kg (incl. battery)
Walking payload
4 kg
Runtime
1.5 – 2 h
Range
3.4 km
Top speed
9 km/h
Gradeability
40°
Stair height
15 cm (18 cm on AI gait)
Perception
Wide-angle camera ×1 · ultrasonic sensor ×2 · depth camera ×1
Compute host
NVIDIA Jetson Xavier NX
Interfaces
USB 3.0 · HDMI · Ethernet · external power

Representative specifications are shown. All figures are based on the manufacturer's (DEEP Robotics) official test data and may vary in real-world conditions. A detailed spec sheet is available on request.

Lineup

Same series, other configurations

Lite3 LiDAR

SLAM navigation

Draws its own map, then finds its way with it.

WEIGHT
13.5 kg
WALKING PAYLOAD
2.5 kg
RANGE
2.7 km
MAX SLOPE
40°
View details →

Lite3 Venture

SDK development

Ethernet and power rails left open — bring your own compute board.

WEIGHT
12.2 kg
WALKING PAYLOAD
4.5 kg
RANGE
4 km
MAX SLOPE
40°
View details →

Lite3 Basic

Entry level

The lightest way into twelve-DOF legged locomotion.

WEIGHT
12 kg
WALKING PAYLOAD
5 kg
RANGE
5 km
MAX SLOPE
40°
View details →
Status: Operational / LITE3-PRO / Jetson NX / Forward avoidance

Start perception work on day one.

Don't spend the first week on setup. Power it on and the camera and compute host are already wired in.